Clicky

Share

Desiccant Dehumidifier

A desiccant dehumidifier or Adsorption-type Dehumidifiers work by utilising an adsorbent, the amount of moisture in the air is transformed into a film of the adsorbate.

Silica gel activated alumina, and others are some of the frequently utilised adsorbentsVacker India targets clients in Bengaluru, Mumbai, Chennai, Delhi, Hyderabad, Ahmedabad, Kolkata, Thiruvananthapuram, etc. and provides them with a variety of dehumidifier options.

Industrial Mobile Desiccant Dehumidifier

These models employ a few hygroscopic substances as drying agents to remove moisture from the air. It has a capacity of 1 kg per hour and 200 m3 per hour despite its mobility. These portable Dehumidifiers which may be used for both commercial and industrial uses, are provided by Vacker India. Some of the models have been detailed as under:

Light-weight model (TTR 200)

Desiccant Industrial Dehumidifier - Vacker India

A lightweight model dehumidifier takes up less room and has an electronic volume control whose performance may be adjusted automatically based on the humidity. This type additionally has a hygrostat, which helps the device establish the proper degree of humidity. These types, the smallest of all desiccant Dehumidifiers , are sold by Vacker India in places like Bengaluru, Mumbai, Delhi, Hyderabad, Ahmedabad, Kolkata, Chennai, Thiruvananthapuram, etc. They are incredibly portable because of how little they weigh. Some of the other basic features of this model are as under:

  • It has an operating range of 0% RH to 100% RH and -15 °C to +35 °C.
  • It can dehumidify at 0.35 Kg per hour.
  • It has an air flow rate of 40 m³ to 120 m³ per hour.
  • Its filters can be easily replaced without taking the entire equipment into pieces.
  • It is typically used for small warehouses, cold rooms and other small spaces.

It weights around 9 kg hence it is very portable in nature.

It can be fitted with a supplementary hose for air outlet.

Some of the other models of the same series are: TTR 300, TTR 400, TTR 500D, TTR D and TTR 160.

Stainless Steel model (TTR 250 HP)

The stainless Steel model is extremely resilient and effective in challenging conditions. These types have radial fans as well as a separate motor pump that propels air far. These desiccant dehumidifier models made of stainless steel are perfect for use in ships and other maritime applications. Vacker India, India provides these models to places like Bengaluru, Mumbai, Chennai, Delhi, Hyderabad, Ahmedabad, Kolkata, Thiruvananthapuram, etc. Apart from these, some of the other basic features of this model are as under:

  • It has an operating range of 0% RH to 100% RH and -20 °C to +35 °C.
  • It can dehumidify at 1 Kg per hour.
  • It has an air flow rate of 40 m³ to 120 m³ per hour.
  • It requires a nominal air volume of 100 m³ per hour
  • Its filters can be easily replaced without taking the entire equipment into pieces.
  • It is typically used for small warehouses, cold rooms and other small spaces.

This type has an additional internal hose linked so that the flow of air over a long distance may be attached, either to make an outlet for the dry air that has been converted or to make an inlet for moist air. By altering the hose's internal connection, it is simple to do. Long and flexible hoses may be added to these stainless steel desiccant marine dehumidifiers to transport the dried air across great distances. With the aid of the same long, flexible hose, the processed air may be sent over a great distance or to any particular area as needed.

Some of the other models in Stainless Steel Desiccant Marine Dehumidifier series are: TTR 250 and TTR 250 Ex.

Explosion Proof Stainless Steel Model (TTR 250 Ex)

The Explosion Proof Stainless Steel Models are among Vacker India's higher-end desiccant dehumidifiers It has a larger capacity and is capable of performing all the duties expected of high-feat dehumidifiers. These types are intended to be installed in locations where explosions are likely to occur. These dehumidifiers guard against moisture and rust in the surroundings. These models fully adhere to ATEX zone 22's Ex II 3D Ex c T240 °C protective class. Apart from these, some of the other basic features of this model are as under:

  • It has an operating range of 0% RH to 100% RH and -20 °C to +35 °C.
  • It has an air flow rate of 180 m³ per hour.
  • It has the dehumidification capacity of 1.1 Kg per hour.
  • Its weight is 21 kgs.
VBot